In April our specialists (100 TONN MONTAZH) loaded and shifted SIEMENS rotors and stator. Total weight of the equipment is 256 tons. The transportation was performed under the rain along the washed out clay roads, which, nevertheless, did not prevent us from work accomplishment ahead of the schedule. See the details in section Projects.
Our specialists (100 TONN MONTAZH) repaired a dock leveller at BIAXPLEN Plant in Zheleznodorozhny. The dock leveller was dismantled. Metal caisson foundation was installed for its reinforcement.
In July our specialists (100 TONN MONTAZH) unloaded, shifted, lifted and set to a final position two pod drives (163 tons each). The pod drives were installed aboard supply vessel Vsevolod Bobrov on request from Severnaya Verf (OAO), St.Petersburg. Installation of the pod drives is a very complicated operation. This is the second implemented project within the framework of our collaboration with this Customer. See the details in section Projects.
Our specialists have successfully shifted, lifted and arranged ventilation equipment from the Togliatti port to the territory of special economic zone Togliatti on request from OZON FARM company. A special installation platform was designed and manufactured to lift the equipment to the second floor of a new factory building under construction. The equipment was lifted to the roof with the help of a truck crane.
In June 2016 our Company (100 TONN MONTAZH) unloaded, de-preserved, performed SKD assembly and installed four gas-generator plants Wartsila in Kazakhstan. Due to the use of a GP500 gantry system, the primary contractor managed to start installation of the equipment directly on completion of installation of load-bearing metalware of the building with simultaneous installation of the sandwich-panels. This technology considerably decreased the timelines of the works implementation. The works were rather difficult for execution due to simultaneous implementation of construction and installation works at the site, as well as due to necessity to keep up with precise positioning of the gas-generator plants onto vibration mounts (1 mm tolerance).
In April 2016 our Company dismantled a 15-25 turning-and-boring machine at the production site of EVRAZ NTMK (EVRAZ Nizhny Tagil Metallurgical Plant, OAO) in Nizhny Tagil (Sverdlovskaya Oblast).
Lifting capacity of the available overhead cranes turned to be insufficient for the required operations, therefore a GP 60 gantry system with special tools was applied for the works. The works were accomplished in four stages: dismantling, transportation, installation and setting to work under supervision of EVRAZ NTMK specialists. It should be noted that prior to set the machine to work, the CUSTOMER’s land-surveyor had developed an as-built drawing for installation of the machine parts, which led to ideal installation of the machine.
Уважаемые коллеги и партнеры, приглашаем Вас посетить стенд нашей компании на ежегодной специализированной выставке Металлообработка-2012, которая будет проходить в ЦВК „Экспоцентр“ с 28 мая по 1 июня.