In February 2017, our Company (100 TONN MONTAZH) relocated and installed a 80-tonnne HEINRICH GEORG TRM120/15/11-6h-3200 Straightening Machine for KUMZ (Kamensk-Uralsky Metallurgical Works, OAO). A gantry system was urgently engaged for the works. It was fitted with special tools for high precision positioning of the machinery. The works were accomplished under normal conditions in due time.
Our Company (100 TONN MONTAZH) installed process machinery in the auto body painting shop. The works were performed within the premises of StavropolAvto Plant under construction in Stavropol on request from CNTUS Sungjin (South Korea). We engaged about 150 specialists for this project. Total mass of the assembled equipment is 4000 tonnes.
Our Company (100 TONN MONTAZH) loaded, transported, relocated and set into the pit to final position a 47-ton anvil block of the hammer in Bolshoy Istok, Sverdlovskaya Oblast. Hydraulic gantry system GP125 allowed accomplishing all the works without roof dismantling in the shortest possible time within the premises of a new production site.
Our Company (100 TONN MONTAZH) unloaded a 25-ton КИ 2134 simple action single point press from the railway compartment, relocated and installed it. The works were performed for Tikhvin Freight Car Building Plant.
Our Company (100 TONN MONTAZH) dismantled, relocated and put to storage a 80-tonne sheet-straightening machine СКМЗ 7х2800 in Tikhvin, Leningradskaya Oblast.
Our Company (100 TONN MONTAZH) accomplished installation works setting two MAG HÜLLER HILLE machining centres to final position within the premises of the Yaroslavsky electric machine-building plant. Relocation of the machinery to the installation site, marking, anchoring and installation of the machining centres were performed in due time.
Our Company (100 TONN MONTAZH) dismantled, packed, loaded and relocated a Satos-22 K+NN-based plywood grinding line, as well as aspiration machinery to a new site. Total mass of the dismantled equipment is more than 100 tonnes. The machinery has been delivered to the Customer’s site.
Our Company (100 TONN MONTAZH) together with the SCHOLPP Iberica specialists dismantled, packed and loaded BBM Kautex blow machine. The maximum weight of one piece of the machinery is 56 tonnes. As always, all the works have been accomplished in due time.