16 Jun 2016

SIMPAC-based precision blanking system installation

On June 15, 2016 mechanical press SIMPAC (Korea, model MC2-500) being part of a precision blanking system was successfully unloaded from vehicles, shifted to the installation site and assembled at the Czech Brano Group Vehicle Components Plant in Kstovo, Nizhegorodskaya Oblast. Gantry system GP-125 was used for the press installation. Due to limited ceiling height, the tension rods were installed simultaneously with the installation of the press head on a foundation (such an installation scheme was applied for the first time ever). The tension rods were tightened and the monoblock underwent precision check. The Customer expressed his gratitude to our installation workers for their team work and professionalism.

24 Dec 2015

Manufacturing lines relocated in Syzran

In August 2015 our Company (100 TONNE MONTAGE) dismantled, relocated and mounted pouring and thermoforming lines at Avtokomponent Plant in Syzran. The works had to be accomplished within short timelines during AvtoVAZ company holidays (Customer of Avtokomponent Plant).

The following operations were carried out within the framework of the project: cases of the pouring modules were took to pieces, gantry robots and presses were dismantled; then they were loaded onto transport trolleys, shifted into a new workshop, assembled and mounted. Thermoforming lines were
also dismantled, loaded onto transport trolleys, shifted into a new workshop and mounted. All the works were accomplished in due time.

25 May 2011

Mounting of engines coloring equipment for “Avtodiesel” JSC is accomplished (Yaroslavl Motor Factory)

In June 2011 100tonn-service engineers have completed mounting of the engines coloring equipment, manufactured by SOP International (Slovenia) for “Avtodiesel” JSC. The works were executed within the framework of the project of mounting of technological equipment of the factory for midrange in-line engines Yaroslavl Motor Factory-530.

We were responsible for execution of all main works such as: basement marking, drilling, anchors setting, equipment moving in the work shop, unpacking, assembling according to project layout, fastening and mounting. 8 thousand clenches have been set during installation works. The works were executed under representatives of manufacturing company (SOP International) supervision. It took us three months to accomplish all the works. The last stage was ventilation duct setting.