22 Aug 2016

Energy equipment shifted and unloaded at Verkhnetagilsky State Power Station

In April our specialists (100 TONN MONTAZH) loaded and shifted SIEMENS rotors and stator. Total weight of the equipment is 256 tons. The transportation was performed under the rain along the washed out clay roads, which, nevertheless, did not prevent us from work accomplishment ahead of the schedule. See the details in section Projects.

15 Aug 2016

Dock leveller repaired in Zheleznodorozhny

Our specialists (100 TONN MONTAZH) repaired a dock leveller at BIAXPLEN Plant in Zheleznodorozhny. The dock leveller was dismantled. Metal caisson foundation was installed for its reinforcement.

10 Aug 2016

Pod drives installed aboard Vsevolod Bobrov vessel

In July our specialists (100 TONN MONTAZH) unloaded, shifted, lifted and set to a final position two pod drives (163 tons each). The pod drives were installed aboard supply vessel Vsevolod Bobrov on request from Severnaya Verf (OAO), St.Petersburg. Installation of the pod drives is a very complicated operation. This is the second implemented project within the framework of our collaboration with this Customer. See the details in section Projects.

04 Aug 2016

Ventilation equipment lifted and arranged in Togliatti

Our specialists have successfully shifted, lifted and arranged ventilation equipment from the Togliatti port to the territory of special economic zone Togliatti on request from OZON FARM company. A special installation platform was designed and manufactured to lift the equipment to the second floor of a new factory building under construction. The equipment was lifted to the roof with the help of a truck crane.

01 Aug 2016

Gas-generator plants WÀRTSILÀ installed on vibration mounts

In June 2016 our Company (100 TONN MONTAZH) unloaded, de-preserved, performed SKD assembly and installed four gas-generator plants Wartsila in Kazakhstan. Due to the use of a GP500 gantry system, the primary contractor managed to start installation of the equipment directly on completion of installation of load-bearing metalware of the building with simultaneous installation of the sandwich-panels. This technology considerably decreased the timelines of the works implementation. The works were rather difficult for execution due to simultaneous implementation of construction and installation works at the site, as well as due to necessity to keep up with precise positioning of the gas-generator plants onto vibration mounts (1 mm tolerance).

22 Jul 2016

Turning-and-boring machine dismantled, shifted and installed in Nizhny Tagil

In April 2016 our Company dismantled a 15-25 turning-and-boring machine at the production site of EVRAZ NTMK (EVRAZ Nizhny Tagil Metallurgical Plant, OAO) in Nizhny Tagil (Sverdlovskaya Oblast).

Lifting capacity of the available overhead cranes turned to be insufficient for the required operations, therefore a GP 60 gantry system with special tools was applied for the works. The works were accomplished in four stages: dismantling, transportation, installation and setting to work under supervision of EVRAZ NTMK specialists. It should be noted that prior to set the machine to work, the CUSTOMER’s land-surveyor had developed an as-built drawing for installation of the machine parts, which led to ideal installation of the machine.

20 Feb 2016

Equipment mounted for Zagorsky Pipe Plant

On February 20, 2016 our Company completed assembling works of the technological equipment for electric-weld pipe workshop in due time. This equipment included the equipment for external and internal coating at Zagorsky Pipe Plant. The suppliers of the equipment (Haeusler AG and Selmers b.v.) are adjusting equipment and manufacturing trial batches of the pipes. Total amount of the equipment mounted, connected and set to operation equals to 5 thousand tonnes.

03 Feb 2016

Horizontal boring-and-turning mill shifted and assembled

Within the period from January 27 to February 03, 2016 on request from AO Mariysky Machine Building Plant our Company unloaded a 55-tonne horizontal boring-and-turning mill 15, shifted it and assembled it element by element.

By means of hydraulic gantry system GP125 our specialists dismantled, upended and shifted a 10-tonne 2657B counterweighted post of the horizontal boring-and-turning mill.